From 59,50

Box of 15 filters € 845.00. incl. VAT

Price per filter € 59.50. incl. VAT

The Stetzerizer filter is designed to filter harmonics and other high frequency current (dirty electricity) from the electrical environment, thereby reducing the potential leakage into the human environment. This dirty electricity is caused by modern devices that are connected to the electricity network. With the so called microsurge meter (see photograph) we can measure the extent of the electromagnetic “pollution” and determine whether netfilters should be installed.

Health effects of dirty electricity

In recent years scientists have investigated the possible effects of dirty electricity on human health. Leading is the research of dr, Magda Havas PhD. (Trent University, Peterborough, Canada) and the research of dr. Sam Milham MD. For further information see www.magdahavas.com andwww.sammilham.com .

Informative videos of dr. Magda Havas

The relationship between electro sensitivity and diabetes: Electro sensitivity and diabetes

Blood sugar levels of some diabetics depend on the amount of electromagnetic pollution in their environment. In an electromagnetic clean environment type 1 diabetics need less insulin and type 2 diabetics have lower sugar levels.

and

The relationship between electro sensitivity and multiple sclerosis: Dirty electricity and multiple sclerosis

Men and women who were diagnosed with multiple sclerosis had a better body balance in environments with low levels of electromagnetic pollution. The ones who walked with a stick were able to walk without a stick several weeks after Stetzerizer filters were installed in their homes.

Informative video of dr. Sam Milham

Health effects by dirty electricity: Dirty Electricity — Stealth Trigger of Disease Epidemics and Lowered Life Expectancy

Other case studies

Several other case studies have been presented. Stetzerizer filters were installed in schools where staff and students suffered from the so called Sick Building Syndrome. Both the staff and the students felt better and were more energetic after Stetzerizer filters had been installed.

Several diseases like diabetes, multiple sclerosis, astma, ADD/ADHD and chronic fatique are more common than before. That is also the case for electromagnetic pollution like dirty electricity and radiation of wireless devices. The relationship between electromagnetic pollution and these diseases must be investigated further and the percentage of the population that is electro sensitive has to be determined.

More scientific research into dirty electricity: *World Health Organization, Environment Health Criteria 238, Extremely Low Frequency Fields

Electric and magnetic fields are everywhere in our environment. Scientific research shows acute biological effects when exposed to (Extreme Low Frequencies) electric and magnetic fields in the frequencies up to 100 kHz.

Well known polluting sources

  • The energy supply in your home is the same as the one of your neighbour. So when they create dirty electricity, it will also affect the electricity network in your home. Therefore plug in one or more filters in the electricity distribution board.
  • The inverters of solar panels.
  • Ventilators.
  • Pumps.
  • Compact fluorescent lamps.
  • Transformers.
  • Chargers of electrical equipment.

How does it work?

  • The microsurge meter indicates the measured values in GS-units.
  • For the best result: switch all electronic devices – especially televisions and computers – ON during the installation of the netfilters.
  • Install 1 Stetzerizer in a socket near every television and computer. After installing netfilters there this will also lower the level of dirty electricity in the rest of the house.
  • Continue your measurement with the socket in the electricity distribution board. This because the electricity supply in your house is the same as the one of your neighbour. So if they cause electromagnetic pollution, this may also pollute your electricity network.
  • If the readings on the microsurge meter are higher than 50 GS units, plug in one or more Stetzerizer netfilters in a socket nearby the electricity distribution board.
  • After installing a netfilter you should measure again. If the readings are at least 20% lower than the reading without a netfilter, then you should leave the netfilter in the socket.
  • Measure the readings of the next socket and, if necessary, install a netfilter, etc.
  • When a filter is overloaded you may hear a zoom. Remove the filter or place an extra filter and measure again. Overloaded filters have to be avoided at all times.
  • Measure all sockets in the house and switch the radiation sources on and off. If the readings on the microsurge meter increase considerably when using a device it is recommended to use a filter if the device is used frequently.
  • Install the filters as close as possible to the device that causes the pollution.
  • Because nowadays we have many polluting sources in our homes it is very likely that several filters have to be installed. The average number of netfilters per house is 15. If not enough netfilters are installed it is likely that the netfilters will be overloaded and that has to be avoided at all times.
  • If you need assistance to install the filters please contact an expert of Shielding Technologies.
  • After installing the filters you should measure frequently in order to verify whether the readings have changed.
  • Remark 1: do the measurement in the kitchen after you have measured in all other rooms. This because normally there are few sockets in the kitchen. So it can be inconvenient to install a netfilter in the sockets in the kitchen.
  • Remark 2: if a Stetzerizer netfilter has to be installed in a socket that can be switched off, at the moment of installing the netfilter the socket has to be switched on.
  • After measuring the whole house and after the netfilters have been installed we advise to measure all sockets again. A maximum value of 50 GS-units is recommended and 35 GS-units or less is ideal.

Important

  • After plugging in a filter in a socket you must NEVER plug in another filter in that filter.
  • After plugging in a filter in a socket you must NEVER connect a device with a high ampere heating element (Like for example heaters, etc.).
  • After plugging in a filter in a socket box you must NEVER plug in another filter in that socket box.
  • Because nowadays we have many polluting sources in our homes it is very likely that several filters have to be installed. The average number of netfilters per house is 15. If not enough netfilters are installed it is likely that the netfilters will be overloaded and that has to be avoided at all times.
  • After installing the filters you should measure frequently in order to verify whether the readings have changed.

 

2 filters in stekkerdoos

NEVER PLUG IN TWO OR MORE NETFILTERS IN ONE SOCKET OR SOCKET BOX!

 

2 filters in elkaar in stekkerdoos

  • For use inside homes, offices, etc. Not to be used outside.
  • The Stetzerizer netfilters (220-250V – 50/60 Hz) are equipped with the so called Schuko plug (see below) that is used in many European and other countries.

Schuko Plug 4Stetzerizer filters are CE approved.

See Stetzerizer filter CE approval

Aantal filters

1, 15